Toyota

Polyurethane bushings for Toyota

Subcategories

  • Celica
  • Supra
  • Chaser
  • GT86

    The Toyota 86 is a sports car launched in 2012. The 2-door coupe with front engine and rear-wheel drive is very popular with sports fans. The Toyota GT86 was twin with the Subaru BRZ

    STRONGFLEX bushings for ta GT86

    STRONFLEX bushings are made in two variants: red and yellow . Hardness of the red ones is 80 Sha and they are meant to be a sportier replacement of OEM bushings . The yellow ones are 90 Sha and their priority is handling over comfort. They are ideal for use in motorsport, drift, and dedicated track cars. Despite this, some bushes are availible in yellow variant only. This usually happens when oem bushings are made of hardened rubber.

    Powerflex bushings for ta GT86

    Polyurethane bushings from PowerFlex are made in several colour and hardness variants. They are standardly made in 80 Sha hardness and are violet in colour. Engine bushings are a little bit softer. The black edition bushings are the hardest on our website - 95 Sha. Powerflex bushings for ta GT86 along with STRONGFLEX bushings cover customer needs for 95% cars on our road.

    Some of car descriptions are from www.wikipedia.org

  • Land Cruiser 96-02

    Toyota Land Cruiser J9 came into production in 1996. In some countries it was called Prado. A 3.4 gasoline engine and a 3.0 diesel engine were available.

    STRONGFLEX bushings for ta Land Cruiser 96-02

    STRONFLEX bushings are made in two variants: red and yellow . Hardness of the red ones is 80 Sha and they are meant to be a sportier replacement of OEM bushings . The yellow ones are 90 Sha and their priority is handling over comfort. They are ideal for use in motorsport, drift, and dedicated track cars. Despite this, some bushes are availible in yellow variant only. This usually happens when oem bushings are made of hardened rubber.

    Powerflex bushings for ta Land Cruiser 96-02

    Polyurethane bushings from PowerFlex are made in several colour and hardness variants. They are standardly made in 80 Sha hardness and are violet in colour. Engine bushings are a little bit softer. The black edition bushings are the hardest on our website - 95 Sha. Powerflex bushings for ta Land Cruiser 96-02 along with STRONGFLEX bushings cover customer needs for 95% cars on our road.

    Some of car descriptions are from www.wikipedia.org

  • MR2 SW20 89-99

    In 1989, the Toyota MR2 underwent a complete remake. The new model was larger and heavier by 160 to 180 kilograms compared to its predecessor. The body design has become rounder and more aerodynamic and similar to the Ferrari 348 and Ferrari F355, giving it the nickname "Ferrari for the Poor".

    STRONGFLEX bushings for Sw20 89-99

    STRONFLEX bushings are made in two variants: red and yellow . Hardness of the red ones is 80 Sha and they are meant to be a sportier replacement of OEM bushings . The yellow ones are 90 Sha and their priority is handling over comfort. They are ideal for use in motorsport, drift, and dedicated track cars. Despite this, some bushes are availible in yellow variant only. This usually happens when oem bushings are made of hardened rubber.

    Powerflex bushings for Sw20 89-99

    Polyurethane bushings from PowerFlex are made in several colour and hardness variants. They are standardly made in 80 Sha hardness and are violet in colour. Engine bushings are a little bit softer. The black edition bushings are the hardest on our website - 95 Sha. Powerflex bushings for Sw20 89-99 along with STRONGFLEX bushings cover customer needs for 95% cars on our road.

    Some of car descriptions are from www.wikipedia.org

  • MR2 ZZW30 99-07

    The third generation of the MR2 Toyota had three different names by country where it was sold, the Toyota MR-S in Japan, the Toyota MR2 Spyder in the US, and the Toyota MR2 Roadster in Europe. Many argue that its design was inspired by the Porsche Boxster. This generation was available with a single engine, the 1ZZ-FED 1794cm hliní

    STRONGFLEX bushings for ta Mr2 Zzw30 99-07

    STRONFLEX bushings are made in two variants: red and yellow . Hardness of the red ones is 80 Sha and they are meant to be a sportier replacement of OEM bushings . The yellow ones are 90 Sha and their priority is handling over comfort. They are ideal for use in motorsport, drift, and dedicated track cars. Despite this, some bushes are availible in yellow variant only. This usually happens when oem bushings are made of hardened rubber.

    Powerflex bushings for ta Mr2 Zzw30 99-07

    Polyurethane bushings from PowerFlex are made in several colour and hardness variants. They are standardly made in 80 Sha hardness and are violet in colour. Engine bushings are a little bit softer. The black edition bushings are the hardest on our website - 95 Sha. Powerflex bushings for ta Mr2 Zzw30 99-07 along with STRONGFLEX bushings cover customer needs for 95% cars on our road.

    Some of car descriptions are from www.wikipedia.org

  • RAV 4 06-13

    It has been produced since 2006. The short three-door variant has disappeared from the offer. The design has been modernized. For vehicles without all-wheel drive, the spare space is located under the luggage compartment floor. Since May 2008, in addition to Japan, it has been produced in Ontario, Canada. In 2009 it underwent a small facelift. Significant modernization took place in 2010, when the appearance was completely changed and the single-axle versions were no longer offered.

    STRONGFLEX bushings for ta Rav 4 06-13

    STRONFLEX bushings are made in two variants: red and yellow . Hardness of the red ones is 80 Sha and they are meant to be a sportier replacement of OEM bushings . The yellow ones are 90 Sha and their priority is handling over comfort. They are ideal for use in motorsport, drift, and dedicated track cars. Despite this, some bushes are availible in yellow variant only. This usually happens when oem bushings are made of hardened rubber.

    Powerflex bushings for ta Rav 4 06-13

    Polyurethane bushings from PowerFlex are made in several colour and hardness variants. They are standardly made in 80 Sha hardness and are violet in colour. Engine bushings are a little bit softer. The black edition bushings are the hardest on our website - 95 Sha. Powerflex bushings for ta Rav 4 06-13 along with STRONGFLEX bushings cover customer needs for 95% cars on our road.

    Some of car descriptions are from www.wikipedia.org

  • Soarer 91-00

    The Toyota Soarer Z30 was launched in 1991. The Z30 generation was also one of the first cars to use GPS auto-navigation via a compact disc. Production was discontinued in 2000.

    STRONGFLEX bushings for ta Soarer 91-00

    STRONFLEX bushings are made in two variants: red and yellow . Hardness of the red ones is 80 Sha and they are meant to be a sportier replacement of OEM bushings . The yellow ones are 90 Sha and their priority is handling over comfort. They are ideal for use in motorsport, drift, and dedicated track cars. Despite this, some bushes are availible in yellow variant only. This usually happens when oem bushings are made of hardened rubber.

    Powerflex bushings for ta Soarer 91-00

    Polyurethane bushings from PowerFlex are made in several colour and hardness variants. They are standardly made in 80 Sha hardness and are violet in colour. Engine bushings are a little bit softer. The black edition bushings are the hardest on our website - 95 Sha. Powerflex bushings for ta Soarer 91-00 along with STRONGFLEX bushings cover customer needs for 95% cars on our road.

    Some of car descriptions are from www.wikipedia.org

  • Aristo

Polyuretánové silentbloky STRONGFLEX pre Polyurethane bushings Strongflex, Deuter Toyota


Spoločnosť STRONGFLEX už viac ako 10 rokov vyrába podvozkové diely ako pre nákladné, tak aj osobné automobily.

 Polyuretánové zloženie silentblokov STRONGFLEX pre Polyurethane bushings Strongflex, Deuter Toyota spája najlepšie vlastnosti tohto materiálu a je plnohodnotnou náhradou široko používaných gumených silentblokov. Takéto silentbloky prekonávajú tradičné gumené silentbloky pre Polyurethane bushings Strongflex, Deuter Toyota v niekoľkých vlastnostiach:

Najdôležitejšie vlastnosti produktu:

  • vysoká flexibilita v celom spektre stlačenia
  • výborná odolnosť voči dynamickému zaťaženiu
  • vysoká odolnosť voči abrázií
  • široký rozsah pracovnej teploty
  • vysoká odolnosť voči prasklinám a trhlinám
  • odolnosť voči mazivám, soli, rozpúšťadlám a rôznym typom prírodných podmienok

    Spoločnosť neustále vyvýja nové produkty, ak ste nenašli čo ste hľadali kontaktujte nás prosím